Which stroker to buy in Riyadh: every price and weight in one table

Fourteen products are in stock today, and the gap between the cheapest and the most expensive is 270 SAR. Price is not what decides whether an order gets used or ends up in a drawer — weight, channel count and material are. So this page puts every product in one table, then settles the choice with five questions before you hand cash to the courier.

Every mould, by weight

Weight is the number that changes how a mould behaves in the room. A light one is held in the hand; a heavy one stays where it is put. Everything below is read from the warehouse spec sheet, lightest first — not an estimate and not a supplier photo.

Two rows are worth pausing on. The 13 cm and 15 cm butt moulds weigh the same 1,000 g, so the choice between them is only about outer size — 13 × 12 cm against 15 × 14 cm. And the 1,700 g hip and the 1,850 g realistic mould cost the same 530 SAR, so that decision is about the surface: width or texture.

The rest of the shop

Everything that is not a weighed mould, cheapest first. Where the supplier sheet lists no weight, the table says so instead of guessing — for these, size and price are the honest comparison.

Every one of them sits inside the catalogue, and four products in the second table cost exactly 290 SAR, so the tie there is broken by type rather than by price.

Five questions that settle it

1. How much space do you have? A drawer takes up to about 1.1 kg comfortably. A shelf takes the 1.7 kg and 2 kg moulds — and those are the ones that stay put on a flat surface without being held.
2. One channel or two? Two channels give two textures in one product. They do not make a mould better, and a dual channel takes a little longer to dry.
3. One person or two? Only the harness dildo is built for two. Nothing else in the range substitutes for it, whatever the price.
4. TPE or silicone? Every mould is TPE and is washed with lukewarm water and mild soap. The harness dildo is silicone, which tolerates more heat. Both want water-based lubricant.
5. What is the total at the door? Add a water-based lubricant to whatever you pick. It costs less than a second order.

Delivery and payment, without the fine print

Delivery is inside Riyadh city only, in 1–2 business days, and the courier takes cash at the door — no card, no transfer, no payment link, no deposit. North Riyadh (Olaya, Al Malqa, Hittin, Al Yasmin), central Riyadh (Al Malaz, Al Batha, Al Suwaidi) and south Riyadh (Al Shifa, Al Aziziyah, Al Mansourah) are all covered. Jeddah and Dammam are not, and we would rather write that here than take an order we cannot deliver.

You look over the outside of the box with the courier, then pay. If the box arrives damaged, refuse it or message us the same day. Unopened products in their sealed packaging can be returned within three days; opened intimate products cannot be resold, which is exactly why the questions on this page are worth answering before you order rather than after.

What to add to the first order

One bottle of water-based lubricant, and one storage bag or box. That is the whole list. Silicone lubricant degrades TPE and is the single most common reason a surface turns tacky within weeks — the problem is never the price of the mould, only the wrong bottle beside it.

The full routine — water temperature, soap, drying and the cornstarch trick — is in the five-minute cleaning guide, and the material rules are in TPE and silicone compared.

Storage decides how often it is used

A mould that does not fit where it is kept stops being used. That is the most common way money is wasted in this category, and avoiding it costs nothing: measure the drawer before you choose a weight, and keep the mould away from heat and direct sun.

If storage is tight, stay at or under 1.1 kg and put the saved budget into a second texture rather than a second kilogram.

Everything above is in stock now, and any of it can be ordered without an account: we confirm on WhatsApp, the parcel ships the same working day, and you pay cash at the door.